2" Wheel Spacer for 10 and 12 OTT, 6679240
Compatibility Check
Over-the-tire tracks need a minimum of 2 inches of clearance between the tire sidewalls and the machine to ensure proper operation during tight turns. Wheel spacers are available to increase clearance if needed. Kit consists of one spacer, 8 bolts 6679231, and 8 nuts 6679233.
Order 6679239 for the complete kit with 4 wheel spacers, 32 bolts, and 32 nuts. Required with 10 Inch Bar Over the Tire Tracks for S500 Series, 7528859 and 12 Inch Bar Over the Tire Tracks for S630 and S650, 7524457, 7524457.
Adds 2 inches of clearance.
| Spacer Width | 2" |
| On Center Distance | 8" |
| Stud Size | 9/16 mm |
| Outside Diameter | 10" |
Parts can vary depending on your serial number. Use the Serial Number Parts Finder above or check the Bobcat Online Parts Catalog to ensure the correct part for your equipment.
WARNING: This product can expose you to chemicals including lead and lead compounds, mineral oils, and phthalates which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov