Free Ground Shipping* when you spend $99! Order Bobcat plate compactors, attachments, products, gifts, and parts.

66 Inch Industrial Grapple Fork, 7 Fork Teeth, 7168344

SKU
7168344
Out of stock
$5,997.00
Serial Number:
Model:
Click to apply new Serial Number: Enter your serial number to check compatibility:
View products

66 Inch Industrial Grapple Fork, 7 Fork Teeth, 7168344

66 Inch Industrial Grapple Fork, 7 Fork Teeth, 7168344 grabs and holds onto the toughest materials, like piles of demolition rubble or loose materials:

  • Secures bulky, uneven loads and keeps them in place until you reach your destination
  • Built for maximum power and reliability with 2 tons of force
  • Delivers easy handling of bulky, hard-to-manage materials in the industrial or construction setting  
  • The two-arm design provides a strong, even biting force  
  • Fork bottom for maximum load capability  
  • Built for day-in, day-out duty to bite off the toughest jobs 

Top Tasks: Handle demolition rubble, building materials, recycling, salvage, or scrap materials.

Visibility Matters: The open grapple design provides superior visibility to the work area.

Reinforced Tines: 3/4 inch thick tines are backed by a 4 inch cross section tube, gusseted to the end of the tine. Welded to a 6 inch main frame tube with safety steps.

Replaceable Tapered Forks: The forks allow for picking up larger materials while leaving valuable dirt behind. Additional forks can be added to narrow the space between fork tines. 

Tubelines, Hoses and Hose Guide: Hoses are protected the entire length with a sleeve and routed with little exposure to snags and other hazards. The removeable hose guide keeps hoses in place during operation and allows you to store the hoses high and out of the dirt. Tubelines are protected by a steel cover.

90 Degree Couplers: Less prone to damage, easy to install and remove. No fluid spillage or air inclusion keeping equipment safe and clean.

Dual Hydraulic Cylinders: Built with tough, dual cylinders, Bobcat grapples provide the highest clamping forces in the industry, protected by a steel case. Bobcat industrial grapples offer the force to handle stubborn materials and work faster. Large pins and grease zerks concentrate the force closer to the center of the bucket. As a Bobcat exclusive design, the inertia-welded cylinder ends deliver strong, smooth operation by improving hydraulic cushioning at the end of the stroke.  

Required Components: Relief valve on the carrier is required to operate this attachment and must be purchased separately in related parts below.

 

More Information
Width 66.9"
Height 30.3"
Length 41.1"
Operating Weight 937 lbs.
Open Height 42.6 in
Closed Height 30.3 in
Number of Fork Teeth 7
Number of Possible Fork Teeth (additional forks can be added to narrow the space between fork tines) 13
Model Compatibility

Skid Steer Loaders: S130, S150, S160, S175, S185, S205, S450, S510, S530, S550, S570, S590, S595, S630, S650, S740, S750, S770, S62, S64, S66, S76

Track Loaders: T140, T180, T190, T450, T550, T590, T595, T630, T650, T62, T64, T66, T76

WARNING: This product can expose you to chemicals including lead and lead compounds, mineral oils, and phthalates which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov