Door Latch Sensor for Loaders, 6728459
Compatibility Check
Ensure your skid steer loader door is latched properly with door sensor wiring for the door latch. The sensor deactivates the lift and tilt valves when the door is open. Also order two rivets (6677193). Connects to the door harness and the door latch. To check for correct operation, open the door. The lift and tilt valve light will flash, an audible tone will sound, and the message DOOR will appear in the display. Close the door, and the lift and tilt valve light will go out and the display will return to machine hours.
Note: If you have a forestry door, you will require a different door sensor.
Parts can vary depending on your serial number. Check the Bobcat Online Parts Catalog to ensure the correct part for your equipment.
Model Compatibility | All-Wheel Steer Loaders: A220, A300, A770 Skid Steer Loaders: 751, 753, 763, 773 , 863, 864, 873, 883, 963, S100, S130, S150, S160, S175, S185, S205, S220, S250, S300, S330, S450, S510, S530, S550, S570, S590, S595, S630, S650, S740, S750, S770, S850 Track Loaders: 864, T110, T140, T180, T190, T200, T250, T300, T320, T450, T550, T590, T595, T630, T650, T740, T750, T770, T870 Attachment: Rebar Bender |
---|
WARNING: This product can expose you to chemicals including lead and lead compounds, mineral oils, and phthalates which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov