Grade A Head Gasket, 7030334
Grade A Head Gasket, 7030334 is 1 hole, 0.077 mm thickness designed for the engine cylinder head.
Due to engineering standards, some parts are updated or changed and are assigned a new part number. Previous part number was 7030335.
Order this part and the following part, and follow the procedure for a complete replacement:
The head gasket thickness needs to be correct. Typically there are three thicknesses available and they have a visual identifier (1, 2, or 3 holes).
The head gasket thickness is chosen by measuring piston protrusion. Each piston needs to be measured at top dead center.
Measure the piston at 2 points, making sure you are not measuring in the valve relief areas, and average the readings.
Once done, average all 4 piston numbers and choose gasket from the table.
Parts can vary depending on your serial number. Check the Bobcat Online Parts Catalog to ensure the correct part for your equipment.
WARNING: This product can expose you to chemicals including lead and lead compounds, mineral oils, and phthalates which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov